The DIN-Rail Measuring Instrument PCE-SM1 is suitable for making analog signals bus-capable. Various analog signals such as 0 ... 20 mA, 0 ... 10 V, PT100 etc. are converted from the analog input module to RS485 Modbus.
- Input channels: 2
- Inputs: PT100, 0/4 ... 20 mA, 0 ... 10 V, 0 ... 40 Ω
- Interface: RS485 Modbus (ASCII RTU)
- Power supply: 85 ... 253 V / 20 ... 50 V AC / DC (selectable)
- Power meter for panel-mounting (92 x 92 mm)
- Measurement of U, I, f, P, Q, S, PF...
- Power supply via voltage input
- Alarm function
** Different variants can be selected! Note: This item must be configured before ordering! **
The frequency indicator can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the frequency indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the frequency indicator.
- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs
The panel indicator can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the panel indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the panel indicator.
- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs
The power indicator can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the power indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the power indicator.
- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs
The pressure indicator can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the pressure indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the pressure indicator.
- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs
The process indicator can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the process indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the process indicator.
- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs
The temperature indicator can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the digital universal indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the temperature indicator.
- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs
The voltage indicator can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the voltage indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the voltage indicator.
- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs
The panel meter can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the panel meter applicable in a wide range of applications. The measured values are shown on the large LED display of the panel meter.
- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs
To connect the DIN rail measuring instrument PCE-SM4 via the Modbus machines. This makes it possible to initiate various processes via the H-rail measuring device via a connected HMI.
- Output channels: 4 or 8 (selectable)
- Outputs: 4 relays or 8 OC (selectable)
- Interface: RS485 Modbus (ASCII RTU)
- Voltage supply: 85 ... 253 V / 20 ... 50 V AC / DC (selectable)
- Input channels: 8
- Inputs: binary input
- Interface: RS485 Modbus (ASCII RTU)
- Power supply: 85 ... 253 V / 20 ... 50 V AC/DC (selectable)